What type of fire extinguisher is used in the area of engine start?

Term Keeping the hangars, shop, and the flight line ______ and _______ is essential to safe and efficient maintenance. Definition Clean, and Orderly
Term What type of fire extinguisher should be used during aircraft engine start-up? Definition CO2

Which type of extinguisher can be used for engine fire?

Class C fire extinguisher

These extinguishers are used for fires involving electrical equipment, such as motors, transformers and appliances.

What is the most frequent type of fire on reciprocating engines during the start sequence?

Perhaps the most common type of aircraft fire is one that erupts during engine start. … Excess fuel makes its way into the carburetor intake, then the engine backfires through the carburetor, igniting the fuel along with the dirty air filter.

What are the 4 types of fire extinguishers?

There are four classes of fire extinguishers – A, B, C and D – and each class can put out a different type of fire. Multipurpose extinguishers can be used on different types of fires and will be labeled with more than one class, like A-B, B-C or A-B-C.

What is the procedure if there is a fire during startup?

Keep the engine running for a few minutes, shut down, and inspect for damage. If the fire becomes uncontained, shut down the airplane, shut off the fuel, exit the airplane, and (only) if safe and practical, use a designated fire extinguisher to extinguish the fire.

IT IS IMPORTANT:  What fire department pays the most in Texas?

How do you stop an engine fire?

Shut off the engine. This will stop the flow of fuel, which can prevent a full-blown fire from occurring. Get yourself and all passengers out of the car, and move to a safe place as far away from the car as possible, at least 150 feet away. Call 911.

Which extinguisher is most suitable for oil fire?

Wet Chemical fire extinguishers are the most effective against Class F fires (cooking oils and fats) e.g fats, grease and oil. Therefore they are practical in a kitchen environment.

Which chemical is used in DCP fire extinguisher?

DCP extinguishers are sodium bicarbonate and potassium bicarbonate. coating the fuel surface with chemical powder.

Tame a raging fire