A fire extinguisher, rated not less than 10B, shall be provided within 50 feet of wherever more than 5 gallons of flammable or combustible liquids or 5 pounds of flammable gas are being used on the jobsite.
What is the OSHA standard for fire extinguishers?
NFPA recommends one 2-A fire extinguisher for every 3,000 square feet. OSHA requires employees to have access to an extinguisher within 75 feet. Employees should have access to a fire extinguisher within either 30 or 50 feet, depending on the hazard in question and the rating of the extinguisher (see below).
How do I know what size fire extinguisher I need?
Look at the size of the area and where fires are most likely to start. For a large room, consider a large extinguisher, such as a 10-pound model. For a small room, a 5-pound model should be sufficient.
Does OSHA require fire extinguishers on equipment?
Per our conversation of May 23, the Occupational Safety and Health Administration‹s (OSHA) fire protection and prevention standard (29 CFR 1926.150 – Subpart F) does not state any specific weight or size requirements for fire extinguishers on construction equipment.
What size fire extinguisher does dot require?
The Fire Extinguisher must have an Underwriter’s Laboratories (UL) rating of 10 B:C or more. If the power unit is not used to transport hazardous materials it must be equipped with a single fire extinguisher with a UL rating of 5 B:C or more; or two fire extinguishers with a UL rating of 4 B:C or more.
Are fire extinguishers a legal requirement?
The regulations state that a minimum of two Class A fire extinguishers on every floor of a building are needed, unless the premises are very small, in which case one may be acceptable. … If there is a sprinkler or automatic suppression system in place, fewer fire extinguishers may be required.
Does OSHA require annual fire extinguisher training?
But what many people miss is the fact that, when extinguishers are provided in a workplace setting, OSHA fire extinguisher training requirements state that employees must be trained once a year in their use.
Does OSHA require annual hands on fire extinguisher training?
Employees who are expected to use portable fire extinguishers must be provided with “hands on” training in the use of the fire extinguishing equipment [1910.157(g)(3)]. If the employer chooses to comply with all of 1910.157, there is no requirement to comply with 1910.38.
How often does OSHA require fire extinguishers inspected?
The employer shall assure that carbon dioxide extinguishers and nitrogen or carbon dioxide cylinders used with wheeled extinguishers are tested every 5 years at 5/3 of the service pressure as stamped into the cylinder.