What is the correct way to use a fire extinguisher aim at the top of the fire do not move?

If you aim at the flames (which is usually the temptation), the extinguisher agent will fly right through and do no good. You have to hit the fuel. SQUEEZE THE TOP HANDLE OR LEVER.

Do you aim the fire extinguisher at the top of the fire?

Aim at the base of the fire. If you aim at the flames (which is frequently the temptation), the extinguishing agent will fly right through and do no good. You want to hit the fuel. Squeeze the top handle or lever.

When using a fire extinguisher aim the hose at the top of the flame?

You should aim the nozzle, hose or horn (on a CO2) at the base of any fire because this is where the fuel is, and this is the part you need to extinguish to stop the fire from continuing. If you simply aim at the flames you will not stop the fire permanently and your extinguisher will be empty before the fire is out.

IT IS IMPORTANT:  Best answer: Which type of vessel is required to have a fire extinguisher?

What is the correct order to use a fire extinguisher?

Aim: Aim low, pointing the nozzle or hose at the base of the fire. Do not touch the horn on a CO2 extinguisher, it gets very cold and can damage the skin. Squeeze: Squeeze the handle to release the extinguishing agent. Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.

Why do you aim a fire extinguisher at the base of a fire?

You will be able to discharge the extinguisher. The base of the fire is where you want to aim. The extinguishing agent will fly through the air if you aim at the flames.

What is the best defense against fire?

As always, the best defense against a fire is to be prepared. Take a moment to look at your fire extinguisher.

Is the fire marshal usually the point of contact?

If a fire does occur, the fire marshal must raise the alarm and contact the fire service. Directing people to emergency exits and checking on vulnerable employees to ensure they make it out safe is also under their remit.

When should you not use an extinguisher on a fire?

When do you not use a fire extinguisher?

  1. The fire is too big or would require more than one fire extinguisher.
  2. Fires involving escaping gases, high voltage electrics.
  3. The evacuation route is obstructed.
  4. There are high levels of smoke.
  5. The area is too hot.
  6. You have not been trained.

What are the two golden rules to remember when fighting a fire?

When considering whether to tackle a small fire yourself if you discover one, always bear in mind the golden rule of fire safety; If in doubt, get out, stay out and call the Fire Brigade immediately.

IT IS IMPORTANT:  Why is using water to extinguish a flammable liquid fire not recommended?

What are the four steps of putting out a fire?

The acronym PASS is used to describe these four basic steps.

  1. Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. …
  2. Aim. Approach the fire standing at a safe distance. …
  3. Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. …
  4. Sweep.

What is the fire race procedure?

RACE: Remove, Alarm, Confine and Extinguish or Evacuate

This easy to remember acronym is our University procedure in the case of a fire. Particularly in the hospital, every staff member is trained to recognize and respond appropriately in the case of a fire using this term.

Tame a raging fire