Quick Answer: When using a fire extinguisher The first step is to pull the pin out?

Can you use a fire extinguisher after you pull the pin?

Once the pin has been pulled and the trigger depressed, the canister can lose pressure, making the extinguisher useless in the case of a future emergency. Some experts recommend recharging, repinning and reusing a fire extinguisher just once, and then disposing of it according to local regulations.

Can you put the pin back in a grenade?

It’s possible to put a pin back into the grenade. It came out twenty minutes later. It’s only a safety mechanism. The grenade won’t work until that lever on the side comes off.

What is the four 4 step process to using a fire extinguisher?

Approach the fire standing at a safe distance. Aim the nozzle or outlet towards the base of the fire. Squeeze the handles together to discharge the extinguishing agent inside. To stop discharge, release the handles.

What is the first thing to do in a fire?

Activate the first fire alarm you see and try to help others to evacuate the building. Close doors behind you to help prevent the fire from spreading. Follow the evacuation procedure if you’re at your workplace or follow the escape route signs if you’re a visitor. Listen to instructions given by the Fire Marshal.

IT IS IMPORTANT:  What is the difference between a firefighter and a firefighter paramedic?

What is the correct order to use a fire extinguisher?

Aim: Aim low, pointing the nozzle or hose at the base of the fire. Do not touch the horn on a CO2 extinguisher, it gets very cold and can damage the skin. Squeeze: Squeeze the handle to release the extinguishing agent. Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.

What is ABC in fire extinguisher?

Dry Chemical Extinguishers come in a variety of types. You may see them labeled: “DC” short for “dry chem” • “ABC” indicating that they are designed to extinguish class A,B,and C fires, or • “BC” indicating that they are designed to extinguish class B and C fires.

What will happen if the safety pin is not pulled?

Without that safety pin, the extinguisher could be partially discharged or triggered. The seal will also contain a date indicating the last time it was inspected.

What happens when you pull the pin on a fire extinguisher?

Pull the pin. This will allow you to discharge the extinguisher. Aim at the base of the fire. If you aim at the flames (which is frequently the temptation), the extinguishing agent will fly right through and do no good.

Why do you squeeze the trigger slowly and evenly?

If the extinguisher is too heavy to hold properly, place on the floor next to you and operate. Squeeze the trigger. Squeeze slowly and evenly. This action will release CO2 and expel it through the discharge horn.

Can you really pull a grenade pin with your teeth?

Your target is going to throw it right back if you are not careful with your aim. However, the most bizarre thing about grenades in movies is pulling out the pin with teeth – that is pretty much impossible. … It is estimated that a standard American M67 grenade required 3-5 kg of force for its pin to be removed.

IT IS IMPORTANT:  What is the number 1 cause of death for firefighters?
Tame a raging fire