What is an example of a passive fire protection system?

PFP are a set of components used to compartmentalized a building in order to keep a fire from spreading and require no action to work. … Other examples of PFP include dampers which prevent the spread of fire and smoke through a building’s ductwork, and fire doors which compartmentalize fires.

What is an example of passive fire protection?

PFP products include:

Fire-resisting doors and fire door furniture. Fire shutters. Compartment walls and floors. Fire-resisting walls and partitions.

Which of the following is a passive fire protection system?

Passive Fire Protection (PFP) is an integral component of the three components of structural, fire protection and fire safety in a building. PFP attempts to contain fires or slow down the spread through use of fire–resistant walls, floors and fire rated doors.

What are examples of active fire protection systems?

Some of these systems are automatic, such as a sprinkler system, and others may be manual, like a fire extinguisher. Fire alarms, smoke detectors, and even firefighters are all considered active fire protection systems.

What is passive and active fire protection?

In basic terms, Active fire protection is about detecting, stopping and escaping fire. Whereas passive fire protection means containing the fire and preventing it from spreading further.

IT IS IMPORTANT:  You asked: Is it safe to use a fire pit that is rusted?

What is the best defense against fire?

As always, the best defense against a fire is to be prepared. Take a moment to look at your fire extinguisher.

What are the four main factors influencing fire spread?

Fire spread depends on the principal methods of heat transfer: conduction, convection, radiation and direct burning.

What are differences between active and passive fire protection?

Active Fire protection takes action in order to put out a fire. Passive Fire Protection will help prevent a fire from spreading or resist the initial ignition. They work together by alerting people inside the building of a fire and safely containing the fire so that people may evacuate and/or try to suppress the fire.

What are the fire fighting procedures?

Fire – Reporting

  • 1) Close the door to the room where the fire is located. This will confine the fire to a smaller area.
  • 2) Activate the closest fire alarm system. …
  • 3) Phone 2111 to report the location of the fire. …
  • 4) Extinguish or Evacuate.
  • 5) Do not re-enter the building, until:
Tame a raging fire