What should you do before using a fire extinguisher?
Before using a fire extinguisher, make sure the fire is contained and is not spreading around the area. It is also important to make sure the room has not filled with smoke before using an extinguisher. You should also make sure everyone is evacuated from the building in case the fire spreads.
What are the three things you need to consider before using a fire extinguisher?
Modern fire extinguishers can be operated successfully by following the acronym PASS. This represents Pull, Aim, Squeeze and Sweep. Pull the extinguishers’ safety pin, hold it away from you and release the locking mechanism. Aim low and target the source of the flame rather than the flame itself.
When using a fire extinguisher which action do you perform first?
Discharge the extinguisher within its effective range using the P.A.S.S. technique (pull, aim, squeeze, sweep). Back away from an extinguished fire in case it flames up again. Evacuate immediately if the extinguisher is empty and the fire is not out.
What is the correct order to use a fire extinguisher?
Aim: Aim low, pointing the nozzle or hose at the base of the fire. Do not touch the horn on a CO2 extinguisher, it gets very cold and can damage the skin. Squeeze: Squeeze the handle to release the extinguishing agent. Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.
When should you not use a fire extinguisher?
You should only consider using a fire extinguisher if all members of your home have been alerted to the fire and the fire department has been called. Also, make sure you are safe from smoke and that the fire is not between you and your only escape route.
When should I not use a fire extinguisher?
Do not use a regular “ABC” fire extinguisher if a pan on your stove catches on fire. These can spread the fire or tip the burning pan over. You can use a fire extinguishing spray on a pan fire. Make sure it is tested for use on grease and cooking oil fires.
What is the first thing to do in a fire?
Activate the first fire alarm you see and try to help others to evacuate the building. Close doors behind you to help prevent the fire from spreading. Follow the evacuation procedure if you’re at your workplace or follow the escape route signs if you’re a visitor. Listen to instructions given by the Fire Marshal.
What are the 4 steps for using a fire extinguisher?
The acronym PASS is used to describe these four basic steps.
- Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. …
- Aim. Approach the fire standing at a safe distance. …
- Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. …
Should you have fire extinguisher at home?
Fire extinguishers should be kept on every level of your home, as well as in the kitchen and garage. If a fire starts in your home, first and foremost, evacuate and call the fire department to report the fire. Once these two conditions have been met, you can use the fire extinguisher to try and put out the fire.
What is the best defense against fire?
As always, the best defense against a fire is to be prepared. Take a moment to look at your fire extinguisher.
What are the 4 types of fire extinguishers?
There are four classes of fire extinguishers – A, B, C and D – and each class can put out a different type of fire. Multipurpose extinguishers can be used on different types of fires and will be labeled with more than one class, like A-B, B-C or A-B-C.