The short answer is no, because NFPA 70E® is not Incorporated by Reference in 29 CFR 1910.6. However, OSHA has several comparable standard requirements that are enforceable: 29 CFR 1910.132 (d)(1): Requires employers perform a personal protective equipment (PPE) hazard assessment to determine necessary PPE.
Does OSHA reference NFPA 70E?
From an enforcement perspective, OSHA does not enforce NFPA 70E. … OSHA may, however, use NFPA 70E to support citations for violations relating to certain OSHA standards, such as the general requirements for personal protective equipment found in 29 CFR 1910.335.
What is NFPA 70E OSHA?
NFPA 70E, which is titled “Electrical Safety Requirements for Employee Workplaces,” is the NFPA’s consensus standard for workplace electrical safety. It covers employee protection from electrical hazards including shock, arc blasts, explosions initiated by electricity, outside conductors, etc.
What is the difference between OSHA and NFPA?
The Occupational Safety and Health Administration (OSHA) sets federal standards for workplace safety and has developed regulations that apply to dust explosions. … Standards set by the National Fire Protection Association (NFPA) are published by scientists and other leading experts in the field of fire safety.
Is Arc Flash required by OSHA?
OSHA requires employers to protect employees from electrical hazards, including arc flash. OSHA issues citations based on the requirements of NFPA 70E through existing Agency regulations.
Is NFPA 70E training required by OSHA?
OSHA 1910 Subpart S mandates that any employee who might come into contact with an electrical hazard must receive electrical safety training. Though OSHA does not specifically call for NFPA 70E training, it is considered the industry standard for worker safety and compliance.
What is the difference between NFPA 70 and NFPA 70E?
What is the difference between NFPA 70 (NEC®) and NFPA 70E? The National Electrical Code® is generally considered an electrical installation document and protects employees under normal circumstances. NFPA 70E is intended to provide guidance with respect to electrical safe work practices.
What is the purpose of NFPA 70?
Adopted in all 50 states, NFPA 70, National Electrical Code (NEC) is the benchmark for safe electrical design, installation, and inspection to protect people and property from electrical hazards.
Is NFPA 70E mandatory?
While NFPA 70E training is NOT required by law except for contractors to the Department of Energy [10CFR 851.23(a)(14)], meeting OSHA requirements for electrical safety training IS required by law.
Who does NFPA 70E apply to?
NFPA 70E applies to employees who work on or near exposed energized electrical conductors or circuit parts. This includes electrical maintenance personnel, operators, troubleshooters, electricians, linemen, engineers, supervisors, site safety personnel or anyone exposed to energized equipment of 50 volts or more.
Is NFPA mandatory?
In most cases, compliance with NFPA standards is voluntary. However, in some cases, federal or state Occupational Safety and Health (OSHA) agencies have incorporated wording from NFPA standards into regulations. In these cases, complying with the standards is mandatory.