Is Code for maintenance of fire hydrant system?
The provision of internal hydrant is covered in IS 3844 : 1989. Code of practice for installation and maintenance of internal hydrants and hose reel on premises ( jirst revision )’. This standard covers provisions of installation, inspection and maintenance of external hydrant systems.
Is code for fire hydrant valve?
Fire hydrants, namely, stand post type, conforming to IS 908: 1975 and underground type conforming to IS 909: 1975 should be provided. For use in industrial establishment, only stand post type hydrants should be provided.
Is codes for fire fighting system?
LIST OF INDIAN STANDARDS FOR FIRE FIGHTING
|636: 1988||Non-percolating flexible fire fighting delivery hose (third revision)|
|2871: 1983||Branch pipe, universal for fire fighting purposes (first revision)|
|3589: 1981||Electrically welded steel pipes for water, gas and sewage 150 to 2000 mm nominal size) (first revision)|
What is the height of a fire hydrant?
Fire hydrants are to be located within five (5′) feet from the curb. A four (4”) inch discharge shall be placed at a 90 degree angle to the curb. Hydrants are to be set plumb, with the four (4”) inch outlet centered at eighteen (18”) inches above the grade or ground, whichever is higher. 5.
What is the color code for fire hydrants?
The color code for 1,500 GPM and above is light blue; 1,000 to 1,499 GPM – green; 500 to 999 GPM – orange; less than 500 GPM – red.
What is the required pressure for fire hydrant?
1.8. 4 The pressure in the hydrant pipe work shall be kept constant at 6 Kg/cm2. In the event of fire when any of the hydrant valve in the network is opened, the resultant fall in header pressure shall start the AC motor driven fire pump through pressure switches automatically.
Is code for fire hose box?
HS Code used for Fire hose box – Import
|Hs Code||Description||No of Shipments|
|8424||Mechanical Appliances (Whether Or Not Handoperated) For Projecting, Dispersing Or Spraying Liquids Or Powders; Fire Ext|
|7326||Other Articles Of Iron Or Steel|
What is stand post type fire hydrant?
0.2 Hydrants are invariably used for fire fighting purposes to derive water from the water line. The hydrants could be stand post type or underground that is sluice-valve type. This standard covering fire hydrants, stand post type was first published in 1958 and revised in 1965.